My poor and crappy and main rig.... I need to rebuild.
CPU-Z Report
--------------------------------------------------------------------------------
CPU-Z version 1.30.
CPU(s)
Number of CPUs 1
Name Intel Celeron
Code Name Northwood
Specification Intel(R) Celeron(R) CPU 2.00GHz
Family / Model / Stepping F 2 7
Extended Family / Model 0 0
Brand ID 10
Package mPGA-478
Core Stepping C1
Technology 0.13 µ
Supported Instructions Sets MMX, SSE, SSE2
CPU Clock Speed 1993.5 MHz
Clock multiplier x 20.0
Front Side Bus Frequency 99.7 MHz
Bus Speed 398.7 MHz
L1 Data Cache 8 KBytes, 4-way set associative, 64 Bytes line size
L1 Trace Cache 12 Kµops, 8-way set associative
L2 Cache 128 KBytes, 2-way set associative, 64 Bytes line size
L2 Speed 1993.5 MHz (Full)
L2 Location On Chip
L2 Data Prefetch Logic yes
L2 Bus Width 256 bits
Mainboard and chipset
Motherboard manufacturer Intel Corporation
Motherboard model NBGV - Northwood/Brookdale-G Validation Board, None
BIOS vendor
BIOS revision 3.21
BIOS release date 07/16/2003
Chipset Intel i845GL rev. A1
Southbridge Intel 82801DB (ICH4) rev. 01
Memory
DRAM Type DDR-SDRAM
DRAM Size 512 MBytes
DRAM Frequency 132.9 MHz
FSB:DRAM 3:4
CAS# Latency 2.5 clocks
RAS# to CAS# 3 clocks
RAS# Precharge 3 clocks
Cycle Time (TRAS) 6 clocks
DRAM Idle Timer 16 clocks
# of memory modules 2
Module 0 Smart Modular DDR-SDRAM PC2100 - 256 MBytes
Module 1 Micron Technology DDR-SDRAM PC2100 - 256 MBytes
Software
Windows version Microsoft Windows XP Home Edition Service Pack 1 (Build 2600)
DirectX version 9.0c
Only excluded info is
xtasy radeon 9200 256 MB PCI
NEC ND 2510a OEM with RPC1 2.17 firmware
60GB maxtor HDD
My crappy rig
Moderator: victimizati0n
