From 40 degrees C to 36 degrees C

Message

2005 · #1 Post by **2005** » Sun Feb 05, 2006 12:12 pm

Well today I finally got unlazy and applied that thermal compound to the cpu. It was dirty as fuck lol the old thermal pad they had on their dried up and formed clumps. Cleaned it off with a lil 91% Isypropyl Alcohol and then cleaned off the underside of the heatsink. Cleaned the dust out of the heat sink , placed a small drop of the compound onto the center of the CPU and re fastened the heatsink. It used to idel at 104 F and now idels at 96.8 F... I guess not that big of a difference, but it cant hurt.

#2 Post by **palmboy5** » Sun Feb 05, 2006 12:24 pm

just a small drop?? lol eh i went and put enough so that i could spread it across most of the IHS using a knife ^^

I7Iz490N · #3 Post by **I7Iz490N** » Sun Feb 05, 2006 12:41 pm

2005 · #4 Post by **2005** » Sun Feb 05, 2006 1:26 pm

Both the heat sink and the CPU. Its harmless and as it was such a high percentage it evaporated very quickly. Cleans old thermal grease/pads off very thoroguly and quickly. Just a small dab in the center is enough as the suction like feeling that the processor top gets from the HS will spread the grease out

I7Iz490N · #5 Post by **I7Iz490N** » Sun Feb 05, 2006 1:36 pm

#6 Post by **palmboy5** » Sun Feb 05, 2006 1:40 pm

you should use GooGone or however you spell it

2005 · #7 Post by **2005** » Sun Feb 05, 2006 2:36 pm

If you have a high concentration of iso alcohol is about the best to use. I just took a Q-tip and dabbed it into some alcohol and rubbed it back and forth across the surfaces until they were clean, took like 6 q tips though.

#8 Post by **palmboy5** » Sun Feb 05, 2006 2:44 pm

lets hope it didnt burn the actual metal in any way

I7Iz490N · #9 Post by **I7Iz490N** » Sun Feb 05, 2006 2:44 pm

2005 · #10 Post by **2005** » Sun Feb 05, 2006 2:47 pm

I've never heard one report of anyone messin up a ISH or HSF with iso alcohol on THG fourms. Alot of the long term resident members recommend it be done this way. Now soaking it in the alcohol for like 2 hours might be a bad idea but whatever floats your boat.

Q12321 · #11 Post by **Q12321** » Sun Feb 05, 2006 8:56 pm

I clean my shit off with alcohol too. Didn't know anyone else did. I use 70% though, just because that happens to be what I always end up having.